Giddings & Lewis H-70-FX, BORING MILL, HORIZ, FLOOR TYPE, CNC
Stock Number: 5649
Giddings & Lewis H-70-FX
Age: 2001
Condition: Very Good
Click to view larger photo
| Specification | Description |
|---|
| Diameter | 7" |
| Taper | CAT 50 ANSI B5.50 |
| Motor HP | 107 HP |
| Speeds Min RPM | 12 - 2,200 RPM |
| X-Horizontal | 384" |
| Y-Vertical | 144" |
| Z-Spindle | 60" |
| | |
| Spindle Feed Ranges on X/Y/Z/W1 and W2 | .01 - 150 IPM |
| Rapid Traverse on X / Y / Z / W1 and W2 | 400/500/600/150 x2 IPM |
| Width of Bedways | 60" |
| Tool Changer Positions | 124 ATC |
| CNC Control | G & L 8000B CNC Control |
Equipped With:
Giddings & Lewis 8000B CNC Control (DNC Capable)
AC Servo Drives on All Axes
124-Station Automatic Tool Changer
20 Position Tool Rack
Thermal Compensation For Z-Axis
Collet Type Draw Bar
Numeriprobe Part Probing System
Visual Uptime Management
Flood Coolant Thru the Spindle
External Flood Coolant
3-Way Column with Replaceable Hardened & Ground Box Ways
Roll-Up Type Way Covers
Hanson Oil Chiller
Operators Platform with Power Elevation
Ladder and Verticaly Adj Pendant
Trabon Automatic Lubrication System
Independent Electric Servo Drives on All Axes
Pre-Loaded Ball Screws
Lubri-Cool for Headstock Lube System
Complete Set of Machine and Foundation Drawings
Quick Disconnect Electrics
107 HP Spindle Drive 460/3/60 Cycle
Also Available at Additonal Cost:
R# 17765:
72" x 84" G&L CNC Rotary Table w/ 96" CNC Infeeding Slide
R# 17766:
72" x 72" G&L CNC Rotary Table w/ 48" CNC Infeeding Slide
Inspect Under Power In East Coast Plant!
Manta Machinery & Equipment
352-596-1007
352-596-7003
sales@mantamachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
