BLANCHARD 42-84, GRINDER, SURFACE, ROTARY TYPE, VERT. SPDL
Stock Number: 6371
Blanchard 42-84
Age: 1959
Condition: Very Good
Click to view larger photo
| Specification | Description |
|---|
| Chuck Dia. | 84" (owner says 84" is mag) |
| Max Swing | 96" |
| Height Under Wheel | 20" |
| Grinding Wheel Speeds | 3 to 360 RPM (60 cycle) |
| Wheel Dia. | 42" |
| Spindle HP | 100 HP |
| Down Feeds | 4 - 76 Thousandths |
| Std Blanchard Table Tranny | 4- Speed |
| Chuck Life | 5/8 |
| Floor Space | 219" x 131" x 140" |
| Approx Weight | 70,000 Shipping weight in lbs |
Equipped With:
WET BASE DESIGN
(doesn't have tank that supplied 5 of these wth coolan)
(previous seller kept tank, BUT has pump, pipes, etc)
Rebuilt 2 Years ago, ways scraped, repainted.
Etra wheel holders
pendant control
can be seen under power
represented to be in very good condition
original leveling pads
FEED: Vertical down feed by hand or power. Power feed variable from .004” to .080”per minute with accurate automatic stop.Maximum downfeed before stop operates is .19.8”. Wheel head has rapid raise and lower by power, interlocked with feed.
WATER SUPPLY: Easy cleaning tank in base, capacity 460 gallons. Has outside auxiliary tank (285 gallons capacity) additional.Motor driven pump, 2-1/2" discharge pipe. Connection to wheel head 2", to outside nozzle l-1/2"
STANDARD EQUIPMENT: Blanchard one-piece steel magnetic chuck, waterguards, pump,piping, segment chuck and two sets of grinding segments, outside chuck ring to hold small work, set of wrenches, hose for cleaning tank. Wheel dresser buiIt into head. Operators Handbook.
MOTORS: One 100 H.P. motor in head; one 5 H.P. motor for table rotation; torque motors for headraise and Iower and for table traverse;
one 1 H.P. coolant pump; pushbutton controls; ammeter in wheel
motor circuit; alI mounted on machine.
Manta Machinery & Equipment
352-596-1007
352-596-7003
sales@mantamachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
