LATHES: Okuma LC-20-2ST, Used CNC Lathe


Okuma LC-20-2ST, Used CNC Lathe

Stock Number: 10034

Okuma LC-20-2ST 16swg x 21cc

Age: 1985

Condition: Good


LATHES: Okuma LC-20-2ST, Used CNC Lathe, Click to view larger photo...       LATHES: Okuma LC-20-2ST, Used CNC Lathe, Click to view larger photo...       LATHES: Okuma LC-20-2ST, Used CNC Lathe, Click to view larger photo...       LATHES: Okuma LC-20-2ST, Used CNC Lathe, Click to view larger photo...      
Click to view larger photo


SpecificationDescription
Swing Over Bed15.75"
Max Turn Diameter11.81"
Max Turning Length18.12"
X Travel, Upper/lower6.30"/4.33"
Z Travel, Longitudinal20.47"
Turret Positions Upper/Lower8/12
Spindle Speed3,500 RPM
Spindle Bore2-9/16"
Bar Cap1-11/16"
Spindle Drive Motor20/30 hp
Spindle NoseA2-6
Approx Weight14,000 lbs
Machine Dime151" x 89" x 92"H

Equipped With:
Okuma OSP-5000L-G CNC Control with 9" CRT
25 Male Pin Serial Port and Round Parallel Port
Taper Reader with Facit Interface
Tape Storage 60 Meters
Live Tooling on Upper Turret Only
10" Kitagawa 3-Jaw Hydraulic Chuck, Model HOB-10 (No Top Jaws)
Fine Serration Master Chuck Jaws
Foot Pedal Chuck Control
RPM & Motor Load Gauges Form Main & Live Spindle
Central Automatic Lubrication System
Hardened and Ground Box Style Ways
Hydraulic System with Oil Cooler Built onto Machine
Full Work Area Guarding
12-Tool Lower Turret with (4) Live, (1) Boring Bar and (2) Turning Tool Holders
8-Tool Upper Turret with (3) Boring Bar Holders
Hard Way Covers
Machine Work Light
C Axis
DNC-A Capable
Tool Nose Radius Compensation
Pitch Error Compensation
Profile Generation
Parts and Programming Manuals
Wired for 3 Phase, 60 Hz, 480 Volts


HomeIndexContactView Cart


LATHES: Okuma LC-20-2ST, Used CNC Lathe
Manta Machinery and Equipment Sales, Inc
352-596-1007

sales@mantamachinery.com



Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com