Tahl 200" x 100', LATHE, ENGINE, MODULAR STYLE, PATE TYPE VARI-SPEED
Stock Number: 5262
Tahl 200" x 100', Modular Style
Condition: Very Good
Click to view larger photo
| Specification | Description |
|---|
| Swing | 230" (180 w/o risers) |
| Swing over Cross Slide | 230" (180" w/o Risers) |
| Swing in Gap | 230"(180"w/o risers) |
| Spindle Speeds | 0-20 RPM |
| Center Distance | 100' Feet |
| Diameter of Faceplate | 144" |
| Feeding Rages | 0 4 IPM |
| Compound Travel | 90" |
| Compound Angle Range | 0 - 90 Degrees |
| Number of Faceplate T Slots | 20 (radial pattern) |
| Tailstock Spindle Tabper | 6 MT |
| Main Drive Motor | 30 HP |
| Electrical | 240V / 3ph / 60 Cycle |
| Work Load Limit | 100 Tons |
| Approx Weight | 198,000 Lbs |
Equipped With:
Toolblock: 6' W x 8' L x 6' High
Tailstock: 6' W x 9' L x 9' High
(2) Rams: 3'Wide x 18' L x 3' High
Jaw Extensions: 2' Wide x 7' L x 3' High
(2) Risers: 1'-10 Wide x 6' L x 2' High
(4) Risers: 2'3 W x 8' L x 2' High
(2) Spider Rings: 14' Dia. X 1' High
Component Dimensions Weight (lbs)
L"xW"xH"
Headstock 144x97x166 80,000
Toolblock 96x72x72 32,000
Tailstock 108x72x108 18,000
Spider Rings (2) 168" Dia x 12"H 7,000 ea
Risers (4) 96x27x24 6,000 ea
Risers (2) 72x34x24 3,500 ea
Jaw Extensions 84x24x36 5,000
Rams (2) 18x36x36 8,000 ea
Electrical Control Cabinet
Manta Machinery & Equipment
352-596-1007
352-596-7003
sales@mantamachinery.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
