Used Haas ST-30

Used Haas ST-30 2012
Stock Number: 10619

12″, 3-JAW HYDRAULIC CHUCK
PROGRAMMABLE TAILSTOCK
AUTOMATIC TOOL PRESETTER
CHIP CONVEYOR
HIGH-PRESSURE COOLANT (300 PSI)
HIGH-INTENSITY LIGHTING
SPINDLE ORIENTATION
RIGID TAPPING
USB DRIVE

** SPINDLE TIME, AS OF 06/2015 – 2,282 HOURS

** THIS  USED Haas ST-30 MACHINE CUT PRIMARILY STAINLESS
** REPLACEMENT COST, AS EQUIPPED – $92,000

The Used Haas ST-30 is the latest Haas high-performance turning centre – designed to provide heavy cutting ability, extreme rigidity and high thermal stability. It has a maximum cutting capacity of 533 x 660 mm, with maximum swings of 806 mm over the front apron and 527 mm over the cross slide.

The standard 30 hp spindle yields 275 ft-lb of torque at 700 rpm, and spins to 3400 rpm. For heavy cutting operations, an optional 2-speed gearbox increases torque to 840 ft-lb at 200 rpm. The A2-6 spindle nose is equipped with a 10″ hydraulic 3-jaw chuck. The machine is equipped with a 12-station bolt-on style tool turret.

Whatever your requirements, there’s a Haas ST-30 turning centre designed to meet your needs. Generous travels, large workpiece capacities and an array of models and options combine to make Haas the logical choice for any turning requirement.

Built using heavily ribbed, American-made iron castings for superior vibration damping, these rugged machines utilise Haas’ exclusive torque-tube base design – with more than double the mass of competitors’ models – for superior rigidity. The result is high accuracy, consistent repeatability and superb surface finishes – all while maintaining dependability and value-based pricing Used Haas ST-30

Contact: Gerald Heddleson at Manta Machinery
352-596-1007
sales@mantamachinery.com

10619_4 10619_3 10619_2 10619_1 10619