Mazak Nexus Quick Turn 350IIMY for sale

 

10762_9 10762_8 10762_7 10762_6 10762_5Specifications for Mazak Nexus Quick Turn 350IIMY

Max Swing 25.9
Max Cutting Diameter 19.88″
Max Turning Length 51″
X-Cross Travel 10″
Z-Long. Travel 49″
Tool Size 1.25″ x 1.25″ x 6″
Spindle RPM 6 – 2,500 RPM
Rapid Traverse Rate 472 / 787 IM
Turret Type 24 Position
Main Spindle Motor 40 HP AC
Spindle Bore 4.40″
Tailstock Control Fully Programmable
Tailstock Taper MT #4
Weight 17,600 Lbs

Equipped With:
Mazatrol Matrix nexus
12″ Chuck
Sub Micro Input (.000010 min Program Input)
Intelligent Thermal Shield
Conversatinoal and EIA Programming
Standard Tool Pkg
Fully Y Axis Milling
Full C Axis Contouring
Tool Eye
inch Metric Conversion

Immediately available
Only used Sparingly for a few months

This Mazak Quick Turn 350II is still in plant under power
Located in Oklahoma area.

Used Haas VF-4 with HRT-210 Rotary Table

We have this excellent Used Haas VF-4 with Rotary Table.

Options included are : 4 MB of upgraded Memory
Programmable Coolant.
Brushless Drives.
2 SPeed Gear Box.
Through Spindle Coolant.
20 Station Tool Changer.
Rotation and Scaling.
M Codes.
Haas HRT-210 Rotaty Table ( sold with or without on the Used Haas VF-4).
20 H Vector Drive.
4th Axis Ready.
Quick Code.
Chip Auger.
Floppy Drive.
Rigid Tapping
New Spindle in 2011, New Ballscrews in 2013.
New Way Covers in 2011, Taken Excellent Care of.

very Haas vertical machining center (VMC) provides the features and performance you need, making it the best investment you’ve ever considered – providing more utility, flexibility, and productivity than you’ve ever imagined.

 

Below are just a few of the features that make Haas the high-productivity, high-value leader. And the legendary Haas control makes every Haas VMC easy to operate. Built with the operator and programmer in mind, it’s packed with intuitive features you won’t find on any other CNC machining center.

 

used Haas VF-4 Rotary Table Used Haas VF-4 front

Daewoo Puma 300MSB Daewoo Puma 200C

Available Machines from Manta Machinery. These are trade in machines, available now in the Oklahoma area.

Puma 300MSB – 39,500
Okuma Howa HL-35 —- 29,500
Okuma Howa ACT 20 — 19,900
Daewoo Puma 200C —- 24,500
84″ Chuck Cincinnati Hypro Vertical Boring Mill — 99,500

Used Okuma Captain L370

10669_2

Used Okuma Captain L370 Control Photo

Specifications for a Used Okuma Captain L370

Swing……………………,….. 20.86″
Max Turn Dia……………… 14.59″
Max Mach Length…………. 19.6″
X / Z Travel……………………. 10.2″ / 20.4″
Spindle Motor…………………  20/30 HP
Spindle Speed………………… 4,000 RPM
Spindle Bore…………………..2.75″
Turret Configuratin……………1 Turret / 12 Stations
Weight………………………….. 9,000 Lbs
Dimensions…………………… 104″ x 73″ x 69″ High

10669_1

Used Okuma Captain L370

10669

Used Okuma Captain L370

The OSP-P control is Okuma’s revolutionary intelligent numerical control. The Used Okuma Captain L370 uses the latest in control technology. The OSP control is a highly reliable, easy to use control system capable of working with new generations of software and hardware technology. It uses the power of the Microsoft WINDOWS™ operating system to combine Okuma’s OSP control on an open architecture PC-based operating platform. The OSP-P control enables access to almost any application and peripheral including factory management systems, and interfaces with bar readers, barfeeders, robots, probes and tool setters to help streamline production. This OSP architecture is designed to easily accept and utilize available, non-proprietary tools. Multiple USB ports built into each control make technology expansion fast and easy. The OSP-P control has standard Ethernet capabilities that enable immediate access to online documentation applications or selected Internet resources. Through the OSP-P control, communication with established business and production systems is immediately available on the factory floor.  The Used Okuma Captain L370 has a Big Brother which is aptly named Okuma Captain L470.

The Okuma Captain L370 comes with Big Bore options and live tooling Option etc.

Okuma’s innovative and reliable CNC machining technology, combined with comprehensive, localized service and support, allows manufacturers to run continuously with confidence and maximize profitability. We’re the industry’s only single-source provider, with the CNC machine, drive, motors, encoders, spindle and CNC control all manufactured by Okuma, providing a synergistic system that delivers greater reliability and higher performance. Along with our industry-leading distribution network (largest in the Americas), and Partners in THINC ,Used  Okuma Captain L370 empowers customers with quality, productivity and efficiency, enabling competitive advantage in today’s demanding manufacturing environment.

Cincinnati 84 Hypro Vertical Boring Mill

 

The Ways are not scored nor deep grooves. We asked them to wipe down the ways
so that we can see what the ways look like under all that oil / grease.

10601_23Front on shot of the machine
10601_22

This 84″ Hypro is equipped with a fully functioning Side head. Great option, hard to find !10601_20 10601_17

Both of the ram heads swiverl approx 60 degrees. There is also a pendant
Control as you can see on the machine.

10601_13Here is an overall shot of the machine, this is a FLUSH MOUNT machine that requires no PIT

10601_11As you can see again, it has STILL the original belt cover with original paint.  nice !

10601_9

another shot of it10601_5 10601_4 10601_2Here is a shot of the chuck. This 84″ Cincinnati Hypro does NOT come with the fixture that is attached to the chuck. The original chuck is sitting below this fixture. This machine has not been used too much but taken great care of.

 

84″ Cincinnati Hypro Vertical Boring Mill
Cincinnati Hypro

84″ Chuck

Swing……………………………..89″
Height Under Rail………………74″
Feeds………………………………. .010 to .800 IPR
Vert Travel of Rail Hd Rams…. 42″
Vert Travel of Side Head………… 63″
Swivel of Rail Heads……………… +/- 60 Degrees
Table Speeds………………………… 1.1 – 43 RPM (16 Speeds)
Machine Dims………………………….. 188″ x 152″ x 159″
Weight……………………………………..Approx 82,000 Lbs

Excellent Condition 84″ Cincinnati Hypro Vertical Boring Mill

(2) Ram Heads, both swivel
(1) Side Head
Digital Readouts
84″  Chuck
Flush Mount Machine
Pendant Control
This machine has been taken excellent care of and some parts were replaced
to make this machine in excellent running condition. It has had excellent maintanence
throughout it’s life as you can see by the photos. that is ORIGINAL PAINT and there
is flaking still on the ways. Everything works on this machine, It is equipped witih
2 RAM Heads and 1 Side Head and DRO’s
INFORMATION ABOUT A VERTICAL BORING MILL
A Vertical Boring Mill, like this 84″ Cincinnati Hypro (vertical lathe) works much like an engine lathe turned up on and end. You can prefor practically all the typical lathe operations on a vertical turret lathe, including turning , facing, boring , machining  tapers and cutting internal and external threads.  A HORIZONTAL boring mill can be used for many kinds of shopwork such as facing, boring , drilling, and milling. In Horizontal boring mill work, the setup of the work, as well as the setting of the tools is similar to that found in lathe and milling machine work.
As with ANY shop equipment you must observe all posted safety precautions.
The characteristic features of the vertical turret, again, like this 84″ Cincinnati Hypro or Giddings & Lewis 84″ Hypro  lathe are (1) a horizontal table or faceplate that holds the work and rotates about a vertical axis; (2) a side head that can be fed either horizontally or vertically; and (3) a turret slide, mounted on a crossrail that can feed nonrotating tools either vertically or horizontally. Figures 8-1 and 8-2 show vertical turret lathes similar to those generally found in repair ships and shore repair facilities. The main advantage of the vertical turret lathe over the engine lathe is that heavy or awkward parts are easier to set up on the vertical turret lathe and, generally, the vertical turret lathe will handle much larger workpieces than the engine lathe.

Used Komo 510 Mach 3 Router For Sale

Used Komo 510 Mach 3 Router For Sale Year 2000

Still in use in plant and considering most bids.
No longer a big enough need for it to justify
The floor space used.
Located on West Coast USA

 

KOMO 510 mach 3
12 station automatic tool changer
C axis (not used)
32 MM drill block
5’ x 10’ table
Build Year 2000

komo

Komo 510 Mach 3 Router

Call Dave at 352-596-7003
David@mantamachinery.com

 

Used Haas ST-30

Used Haas ST-30 2012
Stock Number: 10619

12″, 3-JAW HYDRAULIC CHUCK
PROGRAMMABLE TAILSTOCK
AUTOMATIC TOOL PRESETTER
CHIP CONVEYOR
HIGH-PRESSURE COOLANT (300 PSI)
HIGH-INTENSITY LIGHTING
SPINDLE ORIENTATION
RIGID TAPPING
USB DRIVE

** SPINDLE TIME, AS OF 06/2015 – 2,282 HOURS

** THIS  USED Haas ST-30 MACHINE CUT PRIMARILY STAINLESS
** REPLACEMENT COST, AS EQUIPPED – $92,000

The Used Haas ST-30 is the latest Haas high-performance turning centre – designed to provide heavy cutting ability, extreme rigidity and high thermal stability. It has a maximum cutting capacity of 533 x 660 mm, with maximum swings of 806 mm over the front apron and 527 mm over the cross slide.

The standard 30 hp spindle yields 275 ft-lb of torque at 700 rpm, and spins to 3400 rpm. For heavy cutting operations, an optional 2-speed gearbox increases torque to 840 ft-lb at 200 rpm. The A2-6 spindle nose is equipped with a 10″ hydraulic 3-jaw chuck. The machine is equipped with a 12-station bolt-on style tool turret.

Whatever your requirements, there’s a Haas ST-30 turning centre designed to meet your needs. Generous travels, large workpiece capacities and an array of models and options combine to make Haas the logical choice for any turning requirement.

Built using heavily ribbed, American-made iron castings for superior vibration damping, these rugged machines utilise Haas’ exclusive torque-tube base design – with more than double the mass of competitors’ models – for superior rigidity. The result is high accuracy, consistent repeatability and superb surface finishes – all while maintaining dependability and value-based pricing Used Haas ST-30

Contact: Gerald Heddleson at Manta Machinery
352-596-1007
sales@mantamachinery.com

10619_4 10619_3 10619_2 10619_1 10619

Used Hyundai HiT-8S CNC Lathe

Used Hyundai HiT-8S CNC Lathe

Swing    11.3
Max Turning Diameter   6.3
X Axis   3.93
Z Axis   11.4

Equipped As:
Siemens CNC Control,
10 Position Turret,
Tailstock

Call Dave at 352-596-7003
Reference Stock No 10463
 

Hyundai 10463_4 10463_1

Used Haas TM-2, TM-1for sale Used

10396_1 10396 10396_2

Haas. Used. Used Haas TM-2. Haas Used

Specification Description
Manuf. and Model Used Haas TM-2
TABLE SIZE 47.75″ x 10.5″
MAX. TABLE LOAD (EVENLY DISTRIB.) 1000 LBS
SPINDLE NOSE TO TABLE TOP 4″ – 20″
X AXIS TRAVEL 40″
Y AXIS TRAVEL 16″
Z AXIS TRAVEL 16″
RAPID TRAVERSE RATE X, Y & Z AXES 200 IPM
CUTTING FEED RATE 0.1 – 200 IPM
SPINDLE TAPER CAT 40
AUTOMATIC TOOL CHANGER 20 STATIONS
SPINDLE SPEEDS 0 – 4,000 RPM
SPINDLE MOTOR (PEAK RATING) 7.5 HP
MAXIMUM TOOL WEIGHT 12 LBS
MACHINE WEIGHT, APPROX. 4,000 LBS
DIMENSIONS, APPROX. 96″ x 70″ x 104″

 

Manta Machinery  & Equipment specializes in buying and selling in Used Haas TM-2 Used Haas Vertical Machining Centers. We carry a large selection of Used Haas Vertical Machining Centers in stock, and are extremely knowledgeable in all types of Used Haas Vertical Machining Centers. Some of the Used Haas Vertical Machining Centers we carry include models such as Haas VF-0, Haas VF-0E, Haas VF-1, Haas VF-2, Haas VF-2SS, Haas VF-3, Haas VF-3SS, Haas VF-4, Haas VF-4SS, Haas VF-5, Haas VF-6, Haas VF-6SS, Haas VF-7, Haas VF-8, Haas VF-9, Haas VF-10, Haas VF-11, Haas VM2, Haas VM3, Haas VM4, Haas VM6, Haas Mini Mill, Haas Super Mini Mill, Haas TM-1, Haas TM-1P, Haas TM-2, Haas TM-2P, Haas TM-3, Haas TM-3P.

In addition to Used Haas Vertical Machining Centers, we also specialize in all types of CNC chip-making machinery. Contact Manta Machinery first if you are looking to purchase any Used Haas Vertical Machining Centers, or if you are looking to sell any surplus Used Haas Vertical Machining Centers. Let us be your number one source for buying and selling Used Haas Vertical Machining Centers!

Please contact Gerald  @ Manta Machinery at 352-596-1007 or email at sales@mantamachinery.com for more info on this or others we have available

See our inventory of Used Haas Vertical Machining Centers

Mazak Quick Turn 300 for sale used Mazak QT-300 Mazak Quick Turn 30

10411_810411_910411_7Manta Machinery has a Client that has several nice Used Mazak Quick Turn 300’s for sale. each machine will be brought in and gone over so that we can confidently
warranty the machine. I believe two of the machine have barfeeds with them
Used 2000 Mazak Quick Turn 300 and two 2002 Mazak QT-300.

Mazak QT-300 Available Options

Mazatrol Fusion 640T Conversation Control
EIA/ISO programming
User Macros
Chip Conveyor
Tool Eye
All Available books / manuals and
All available Tooling
Tool Eye

specs

Chuck Size ————————————-  12″
Max Swing—————————————-  23.64″
Max Cut Diameter ——————————   16.14″
Max Cutting Length —————————-    27.63″
X Travel / Z Travel —————————–     9.84″ / 28.7″
Spindle Speeds ——————————–     3,300 RPM
Rapids ——————————————     787 IPM / 984 IPM
Turret Config ————————————    1 Turret / 16 Positions
Spindle Motor ———————————–     30 HP
Spindle Bore ————————————-    3.15″
Weight——————————————–     11,000 Lbs

Price……………59,500 FOB Buyers Truck

Mazak is one of the largest cnc manufacturers in the world. Mazak specializes in manufacturing CNC Lathes, CNC Vertical Machining Centers and CNC Horizontal Machining Centers. Mazak has a vast array of various cnc machines ranging from 2-axis lathes to multi-axis cnc lathes to multi-axis cnc machining centers.

Below is guide of the different models that Mazak has introduced throughout the years.

CNC LATHES (2-AXIS):

  • Mazak QT-6G
  • Mazak QT-6T
  • Mazak Nanoturn
  • Mazak QT-8
  • Mazak QT-10
  • Mazak QT-15N
  • Mazak QT-20
  • Mazak QT-20HP
  • Mazak QT-30
  • Mazak QT-40
  • Mazak Nexus 100
  • Mazak Nexus 150
  • Mazak Nexus 200
  • Mazak Nexus 250
  • Mazak Nexus 300
  • Mazak Nexus 350
  • Mazak Nexus 400
  • Mazak Nexus 450
  • Mazak Quick Turn Smart 200
  • Mazak Quick Turn Smart 300
  • Mazak Quick Turn Smart 350
  • Mazak Slant Turn 50
  • Mazak Slant Turn 60
  • Mazak Slant Turn 450
  • Mazak Slant Turn 500
  • Mazak Slant Turn 550M