For Sale Used Haas VF-5 40 Taper Machining Center Vertical Low Hours

For Sale Used Haas VF-5 40 Taper Machining Center Vertical Low Hours

Haas CNC Control with High Speed Machining
16 Meg Extended Memory

VOP-C
Y-Delta (Dual Drive)
Coolant Thru Spindle
Programmable Coolant
High Intensity Lighting
Auto Air
Hand Remote Jog Control
4th Axis Ready (Brushless)
Rotation & Scaling
Spindle Orientation
Chip Auger

Feed Cutting Time: approx.  3463 hrs

 

 

 

 

 

 

Also look at our other machine on our website

Call now for more details
David Heddleson
352-596-7003
david@mantamachinery.com

FOR SALE NEW MORI SEIKI NHX 10000, MACHINING CENTER, HORIZONTAL, CNC

FOR SALE NEW MORI SEIKI NHX 10000, MACHINING CENTER, HORIZONTAL, CNC

QUIPPED WITH:
HIGH-TORQUE SPINDLE 55/45/37KW, 6000 MIN-1(MAX. 1,309 NM) (BT50)
FULL 4TH AXIS ROTARY TABLE
CHANGING TO T-SLOT PALLETS (2PALLETS)
TOOL STORAGE CAPACITY 120 TOOLS (BT50, CHAIN TYPE)
COOLANT COOLING SYSTEM
OIL SKIMMER
COOLANT GUN FOR SETUP STATION SIDE
SPINDLE IN WORK MEASURING RENISHAW SYSTEM
METROL TABLE WORK MEASURING SYSTEM
MAGNA SCALES
MIST COLLECTOR
DIRECT SCALE FEEDBACK X,Y,Z-AXIS
THRU SPINDLE COOLANT

*BRAND NEW
WAS PURCHASED THROUGH AN INSURANCE CO.
WITH SHEET METAL DAMAGE ONLY.
REPAIRED AND ON OUR CA WAREHOUSE

 

 

 

 

 

 

 

Visit our website for more machinery

Call now for this machine

David Heddleson

352-596-7003

david@mantamachinery.com

Top 10 CNC MACHINE MANUFACTURERS IN TODAYS USED CNC MARKETPLACE

Well, here goes. If you agree or disagree please give me some feedback and if I agree I’ll update this list. I’ve always wondered about which machines are most common and sought after….  My list will be coming from 20 years experience in selling used CNC Machinery to various customers.  The way I will compile the list would be which manufacturers are most inquired about, which ones are most requested for quotations, This list is VERY GENERAL and includes mostly CNC Lathes and CNC MILLS.. Im’sure this list would be QUITE DIFFERENT if we were talking about CNC SWISS Machins or CNC Routers, and CNC EDM’s.

etc.  Now…… Here goes ! 😉

10.  Nakamura
9.  Toshiba
8.  Kitamura
7.  OKK
6.  Makino
5.  Okuma
4.  Mazak
3.  Mori-Seiki
2.  Doosan / Daewoo
1.  Haas

Tell me what you think, pass this link around ! Gerald Heddleson at 352-596-1007
sales [at] mantamachinery [dot] com

Used Haas SL-20T 2000 Lathe for sale with Tailstock

Used Haas SL-20T Lathe for sale with the following options:

 

-HAAS CNC CONTROL WITH 14″ MONITOR,
-RS-232C PORT INTERFACE FOR DNC OPERATION,
-8″ 3-JAW HYDRAULIC THROUGH HOLE CHUCK W/JAWS,
-QUICK CODE PROGRAMMING,
-AUTO PARTS CATCHER
-PROGRAMMABLE TAILSTOCK,
-CHIP REMOVAL AUGER
-1 MB MEMORY UPGRADE,
-CUSTOM MACROS, SPINDLE ORIENTATION,
-E I H BARFEED INTERFACE, FLOPPY DRIVE,
-RIGID TAPPING (SYNCHRONOUS / SOLID TAPPING),
-STANDARD COOLANT SYSTEM WITH TANK AND PUMP,
-ALL AVAILABLE MANUALS AND TOOL BLOCK HOLDERS

CALL DAVID HEDDLESON

352-596-7003

david@mantamachinery.com

 

PLEASE BROWSE OUR WEBSITE FOR MORE MACHINES.

 

Used Fadal VMC-8030HT for sale 1995 Fadal VMC8030 for sale Used Fadal for sale Fadal VMC8030HT

Manta Machinery has a client that has a 1995 Fadal VMC-8030HT for sale. This Fadal VMC-8030HT is used and in excellent condition. The machine is equipped with the following—Coolant Thru Spindle / Hydro Sweep / USB Port / Rigid tapping / New Spindle Installed in 2013 / PREWIRED forf 5th AXIS / 4th AXIS WIRED AND READY / X and Y Glass Scales / 422k Memory / MFunctions / taken great care of

When inquiring be sure to mention that this is 9725 ID Number. Below are photos of the machine. Please be sure to call Gerald at 352-596-1007 or email at sales [at] mantamachinery [DOT] com

New Machines added on Feb. 9th 2014

Manta Machinery has located some new machines that we would like to put on our blog…
a quick listing is the following
*** Used Nakamura TW-20 with Fanuc 16TT control with Fanuc Drives and LNS Barfeed
(Used Nakamura TW-20 for sale in plant under power)
*** Used Haas TL-15 for sale, 2004. This Used Haas TL-15 has cut plastic most of it’s life
this machine also comes with a Haas Servo 300 Barfeed with sale
*** Remanufactured Used Fadal VMC-6030HT, 1 year warranty. EVERYTHING is New, NOT REBUILT
*** 2004 Used Haas SL-10T available. Used Haas SL-10T for sale ID# 9697
***TOO NEW TO LIST.. 2010 Haas ST-10, Please call for this listing
Please give Gerald Heddleson a call on the above listings , or email at
sales [at] mantamachinery [dot] come or call 352-596-1007

Bullard 54″ Cutmaster for sale. We are selling our Bullard 54″ Cutmaster

54″ Bullard Cutmaster for sale. For sale Bulalrd 54″ Cutmaster. Used Bullard 54″ Cutmaster Available.

Manta Machinery has a client that would like to sell their Bullard 54″ Cutmaster.. This machine has a SIDE HEAD / TURRET HEAD / and RAM HEAD It is equipped with

a 54′ Face Plate, 2 Axis Digital Readouts, Splash Guards / Guarding. Great Running
machine.. Please contact Gerald Heddleson at Manta Machinery at 352-596-1007
or you can email me at sales@mantamachinery.com
Here are a few photos of this machine below

Samsung SL-35 1500 CNC Lathe for Sale. For Sale Samsung SL-35 x 1500

Manta Machinery has a client selling a Samsung CNC Lathe model SL-35 x 1500.
Samsung SL35 x 1500 for sale. Please do not hesitate to call Gerald at Manta Machinery
at 352-596-1007 or email me at sales@mantamachinery.com
Here are a couple of photos of this excellent CNC Lathe