2012 Haas ST-20 super low hours

Haas ST-20

2012 Haas ST-20

Haas ST-20

2012 Haas ST-20

2012 Haas ST-20

2012 Haas ST-20

HHaas CNC Machine, ST-20

Available with tailstock is one of the nicest Haas CNC
Machines I’ve seen available. the machine is equipped with a tailstock
which is fully programmable. The machine has only been used in a Tech-
School Environment. This Haas ST-20 is for sale and only has approx 85 Hours.
Yes, you read that right, 85 Feed Cutting Hours.

This machine is being offered for sale. Please contact www.mantamachinery.com
for more information. Call 352-596-1007 or cell phone at 352-238-4231
or email at sales@mantamachinery / manta@tampabay.com

Used Haas ST-30

Used Haas ST-30 2012
Stock Number: 10619

12″, 3-JAW HYDRAULIC CHUCK
PROGRAMMABLE TAILSTOCK
AUTOMATIC TOOL PRESETTER
CHIP CONVEYOR
HIGH-PRESSURE COOLANT (300 PSI)
HIGH-INTENSITY LIGHTING
SPINDLE ORIENTATION
RIGID TAPPING
USB DRIVE

** SPINDLE TIME, AS OF 06/2015 – 2,282 HOURS

** THIS  USED Haas ST-30 MACHINE CUT PRIMARILY STAINLESS
** REPLACEMENT COST, AS EQUIPPED – $92,000

The Used Haas ST-30 is the latest Haas high-performance turning centre – designed to provide heavy cutting ability, extreme rigidity and high thermal stability. It has a maximum cutting capacity of 533 x 660 mm, with maximum swings of 806 mm over the front apron and 527 mm over the cross slide.

The standard 30 hp spindle yields 275 ft-lb of torque at 700 rpm, and spins to 3400 rpm. For heavy cutting operations, an optional 2-speed gearbox increases torque to 840 ft-lb at 200 rpm. The A2-6 spindle nose is equipped with a 10″ hydraulic 3-jaw chuck. The machine is equipped with a 12-station bolt-on style tool turret.

Whatever your requirements, there’s a Haas ST-30 turning centre designed to meet your needs. Generous travels, large workpiece capacities and an array of models and options combine to make Haas the logical choice for any turning requirement.

Built using heavily ribbed, American-made iron castings for superior vibration damping, these rugged machines utilise Haas’ exclusive torque-tube base design – with more than double the mass of competitors’ models – for superior rigidity. The result is high accuracy, consistent repeatability and superb surface finishes – all while maintaining dependability and value-based pricing Used Haas ST-30

Contact: Gerald Heddleson at Manta Machinery
352-596-1007
sales@mantamachinery.com

10619_4 10619_3 10619_2 10619_1 10619

For Sale Used Haas VF-2SS Vertical Machining Centers 3 Units available

For Sale Used Haas VF-2SS Vertical Machining Centers 3 Units available
2 2004
1 2005
All Equipped Similarly.
24 Position Side Mount
16 MB Memory
Chip Auger
Programmable Coolant
Remote Jog Handle
Haas Visual Quick Code
Custom Macros
Spindle Orientation
High Speed Machining
4th Axis Enabled

 

 

 

 

Please Call Now for information on these Haas Machines.

Dave Heddleson
david@mantamachinery.com
352-596-7003

For Sale Used Haas VF-5 40 Taper Machining Center Vertical Low Hours

For Sale Used Haas VF-5 40 Taper Machining Center Vertical Low Hours

Haas CNC Control with High Speed Machining
16 Meg Extended Memory

VOP-C
Y-Delta (Dual Drive)
Coolant Thru Spindle
Programmable Coolant
High Intensity Lighting
Auto Air
Hand Remote Jog Control
4th Axis Ready (Brushless)
Rotation & Scaling
Spindle Orientation
Chip Auger

Feed Cutting Time: approx.  3463 hrs

 

 

 

 

 

 

Also look at our other machine on our website

Call now for more details
David Heddleson
352-596-7003
david@mantamachinery.com